This hanger is a drop-in replacement for the following models:
08-14 Subaru Impreza (Incl. WRX and STi)
08-14 Subaru Forester (all)
05-09 Subaru Legacy (Incl. 2.5GT)
05-09 Subaru Outback (Incl. XT)
2015+ Subaru STI
2015+ Subaru WRX
The Radium fuel pump hanger for the late model Subaru vehicles replaces the stock in-tank hanger and allows the use of 1 or 2 high-flow aftermarket fuel pumps in the stock fuel tank. No permanent modifications to the vehicle are required making installation a simple bolt-on job. Each fuel pump has it’s own dedicated 6AN male outlet, which can be combined together into single feed line with the use of a “Y” fitting, or with one of the plumbing kit options on this page. The return fuel and crossover fittings are also 6AN male. The system is safe to use with alternative fuels such as E85.
The machined assembly mounts in the factory fuel tank using the OEM hold-down flange and gasket. The OEM fuel level sender and temperature sensor (if equipped) are retained.
PREVENTING FUEL STARVATION
The kit includes a venturi jet pump integrated within the collector box that features a new integrated pressure relief valve. This device transfers fuel from the passive side of the OEM fuel tank to the active side where the pump(s) reside.
When fuel pump flow is increased, the OEM jet pump becomes too restrictive creating unwanted backpressure in the FPR return line causing excessive fuel rail pressure. The unique design of the Radium jet pump creates suction while not providing too much restriction in fuel return line.
-Billet aluminum top plate, anodized and laser engraved
-Fully enclosed collector box with one-way check valve
-Electrical terminals for the wire connections
-Stainless steel hardware
-AN fuel line connections
-Submersible fuel hose